In most cases a sprinkler system would require the best sprinkler pump. A sprinkler pump is an important component as it is responsible for pumping water through the sprinkler all the way to the sprinkler heads which in turn spread water all throughout your garden.
A sprinkler pump functions to transport water from a water source through the sprinkler system. A good sprinkler pump should be capable of pumping water from any water source including lakes, ponds, aquifers, wells or any water source.
Sprinkler pumps helps sprinkler systems operate in a reliable and efficient manner to evenly water residential and commercial lawns.
A sprinkler pump makes use of a suction pipe to extract water from a source. Why exactly do you need a sprinkler pump?
In short, a sprinkler pump moves water from the source to the sprinkler heads. It is responsible for the steady supply of water to your sprinkler system.
A sprinkler pump is typically positioned between the water source and the valves of the sprinkler system. It steadily pumps water to every spray head.
The sprinkler pump consists of impellers or blades inside a case or housing. The motor and the pump impellers or blades are connected by a shaft.
A vacuum is created when there is zero or low water pressure. Most sprinkler pumps do not create a vacuum but instead create an area where air pressure is more than the pressure.
Once the low pressure area is established, air pressure will push water from the water source to the pump. Once inside the pump, the impellers will push water out of the impeller housing to create a centrifugal action.
Centrifugal action will make water inside the pump reach the sprinkler heads and out to your lawn.
It is important to turn the pump on before turning on your sprinkler system. Leave the pump running, too as long as your sprinkler system is on to ensure the steady flow from the water source to the sprinkler heads.
There are a wide range of sprinkler pumps available in the market. You can choose from a variety of brands, efficiencies, capabilities and designs.
While there are a lot of factors to consider in picking the best sprinkler pump, a unit that is low in maintenance with a long lifespan has an advantage over the competition.
In picking the right sprinkler pump, you will need arm yourself with these information. It is important that you have established your water source. How far away the water source is going to be from the location of the sprinkler pump is vital in your choice of sprinkler pump.
The power of your sprinkler pump must be in direct proportion with your sprinkler system. The sprinkler pump must be able to effectively push water that a sprinkler system needs. If the sprinkler pump is pushing more water than what the sprinkler system needs you are wasting a lot of electricity.
If on the other hand the sprinkler pump is pushing less water than what the sprinkler system needs, you will not be able to have enough water for your lawn.
To determine the amount of pressure your sprinkler system needs, know the pounds per square inch (PSI) and the gallons per minutes (GPM) of the unit. Then check sprinkler pumps that generate power to match them.
Another way to determine the right size of sprinkler pump is to know the number of heads in your sprinkler system. This will dictate how much pressure and water are required from a sprinkler pump to make it efficiently work.
Each sprinkle head has its own PSI and GPM rating. When you have determined these, choose a sprinkler pump with the same Psi and GPM ratings. That way you will not have an excess of pressure. Conversely, your sprinkler system will also not be lacking in pressure from the sprinkler pump.
The suction lift configuration of a sprinkler pump is the vertical clearance it has from the water source. In simpler terms this is how high are you pumping water from the water source to the sprinkler heads.
You should find the suction lift configuration of the sprinkler pump listed in its specifications. The best sprinkler pump should be able to give a lift of about 25 feet.
Each sprinkler pump has a measurement of the ability of the pump to pull water up from the water source to the water pump. If you are pulling water from the foot of the hill upwards you will need to have a sprinkler pump whose maximum depth to water can match the location of the water source.
The specification of the maximum depth to water of a sprinkler pump will tell you if it is capable of driving water from the source to the sprinkler pump.
Self-priming sprinkler pumps eliminate air pockets that have accumulated into the pump on its own. In the winter, most people disconnect their sprinkler pumps form the water source and remove all water so they will not freeze.
When you are ready to use the sprinkler pump during spring, it will save you a lot of time if you no longer have to remove the air pockets inside. Remember that sprinkler pumps that run without water will cause the motor to get busted.
A self-priming sprinkler pump will be ready to use as soon as reconnected to the water source without the need of course of any priming. The pump will not need to be primed as long as it has a foot valve on the suction pipe.
A sprinkler pump has a maximum suction lift of not over 25 feet. This means you cannot place a sprinkler pump over 25 feet above the source of water. If water source is over 25 feet below the pump, a sprinkler pump is not what you need.
The best location for a sprinkler pump is as close as possible to the water source. It is easier for the pump to push water out than to pull water upwards. You need to make sure though that water will not damage the pump.
The sprinkler pump should also be installed in a well-ventilated, dry and clean area to prevent the motor from overheating. The area should also have enough drainage, protection from extreme temperatures and enough space for servicing.
It is also important to position the sprinkler pump in a secure concrete surface so as not to stress it out when in use.
If water source is a stream, lake or river, make sure to install a large screen foot valve keep debris away from the sprinkler pump. Debris clog the internal components of the sprinkler pump which can cause it to malfunction.
Now that you have an idea of what to look for in a sprinkler pump, scroll down and read the reviews and feedbacks of the best sprinkler pumps available in the market.
At 1.5 horsepower, the Flotec FP5172 self-priming sprinkler pump has the capacity to water a large lawn with a sprinkler system of up to 30 sprinkler heads. With its power, it can also be used for pools and fountains.
This sprinkler pump can withstand high water pressures. It is resistant to corrosion can ran on 230 or 115 volt power source. It features a durable fiberglass housing that is durable enough to last for a long time considering that it will be installed outdoors.
This sprinkler pump is capable of supporting auto sprinkling, dewatering and water transfer. This unit comes with a budget friendly price and has a low maintenance requirement.
This high capacity and durable sprinkler pump comes with a 1 year warranty.
The WAYNE WLS150 sprinkling pump is enclosed in a durable cast iron housing that will surely give long years of reliable use. Experts marvel at how easy it is to wire and install this pump. This high volume sprinkle pump easily pulls water to the sprinkler system either above ground or underground.
One of the best things about this pump is it has a quiet operation. It can also be used as a pump to transfer water or as a portable sprinkler system. It can simultaneously accommodate about 8-10 sprinkler heads. At 30 PSI, its flow rate can reach up to 2,950 GPH.
This sprinkler pump is probably the best for its capacity.
If you have a small lawn you will need a small sprinkler system and naturally a small sprinkler pump. The WAYNE PLS100 is a 1 horsepower sprinkler pump with a maximum flow rate of 720 gallons per hour. It is ideal for small sprinkler systems with 2 to 3 sprinkler heads.
The WAYNE PLS100 features a stainless steel construction that is durable enough to last for long years. It is compact and portable making it easy to transport with its convenient carrying handle.
It is easy to install and is a self-priming unit. This means that once primed, you no longer needs to be re-primed even after being winterized.
The WAYNE PLS100 has up to 20 feet of suction lift. This means you can attach it to a garden hose as long as 200 feet and it can push up water even a from a hill of 30 degrees. This small sprinkler pump can impressively pull out a large volume of water.
This sprinkler pump is designed for continuous use without any risk of over-heating.
The Red Lion 614676 Sprinkler Pump is made of a tough and durable metal and cast iron body making it ideal for commercial and residential lawns. It works best in exchanging water and adding to the water weight in your home.
This sprinkler pump is self-priming up to 25 feet. It features a sturdy impeller made of metal. This single engine sprinkler pump runs on either 230 or 115 V power and has a strength of 3450 RPMs. Its maximum flow rate 89 gallons per minute at 45 PSI.
This sprinkler pump works best when place on a level surface and as close as possible to the water source.
This sprinkler pump can be used for commercial and industrial law. It comes with a 2 year warranty.
A good irrigation system is extremely important to maintain a beautiful and healthy lawn. A sprinkler system and a good water source supplemented by a reliable sprinkler pump will evenly water your lawn to achieve the right results.
Shopping for the best sprinkler pump for your home lawn can be tough and tricky. It is hoped that the review above was helpful. Of the sprinkler pumps listed above, the Flotec FP5172 Self-Priming Sprinkler Pump was picked to be the best sprinkler pump.
It is a tough and durable sprinkler pump because of its rugged thermoplastic with fiberglass reinforcement design. It is a powerful sprinkler pump that has the capacity to support with a continuous operation up to 30 sprinkler heads.
It is a self-priming unit that work well for automatic sprinkler systems. It allows water transfers and dewatering. It is designed for easy maintenance as parts are easily within reach.
The efficiency of a sprinkler system is only as good as the sprinkler pump that supplements its operation.
With the endless passion for organic living, I - Ann Sanders has come up with the idea of creating A Green Hand. Being the founder and editor of A Green Hand, my goal is to provide everyone with a wide range of tips about healthy lifestyle with multiform categories including gardening, health & beauty, food recipe,...