fbpx

How to Run Water in Your Garden Through Underground Plumbing & Outdoor Faucet

In current times, it is advised to install an outdoor faucet and opt for underground plumbing for your garden. It’s the right time to stop lugging around that hose. Seek professional help and hire the best plumber in phoenix to make it easy for you to water your lawn/garden with a remote outside faucet. Get rid of troubles like dragging long lengths of pipe. Instead, fit a long-lasting underground pipeline with a blowout valve at a convenient space in your garden. Read the article to get an in-depth understanding of the underground plumbing process.

13 Plumbing Tools You Need For This Project

  • 4-in-1 screwdriver
  • Spade
  • Tube cutter
  • Air hose
  • Caulk gun
  • Drill bit set
  • PEX crimping tool
  • Plumbers tape
  • Soldering torch
  • Adjustable wrench
  • Air compressor
  • Cordless drill
  • Utility knife

17 Plumbing Materials You Need For This Project

  • 3/4-in. copper T
  • 3/4-in. plug
  • 3/4-in. PEX T
  • 3/4-in. female adapter
  • 3/4-in. copper pipe and fittings
  • 3/4-in. PEX to copper transitions
  • 3/4-in. X 1/4-in. reducer
  • Flux
  • Gravel
  • PEX/pipe elbow
  • PVC fence post
  • Sandpaper
  • Sillcock
  • Shutoff valves
  • Lead-free solder
  • Backflow preventer
  • Sprinkler system valve box

Installing an Underground Pipe & an Outdoor Faucet

If you have observed that dragging pipes from place to place is a constant activity in your garden, then it’s high time you determine the need for underground plumbing. Go for a remote faucet and get rid of such hassle forever. It is best to run water in your plants smoothly. Employ the services of an experienced plumbing team who knows how to get the job done in a minimum time frame and within the budget of a homeowner. The plumbing activity will take approximately a day or two (subject to how much trenching is required in your garden) and will cost less than $100.

Digging Trench:

Once you have decided that your garden space needs a modified fitting to run water in the plants, call 811 a few days before starting the plumbing work. This way, utility companies can pre-locate the cables and buried pipes in your lawn. Afterward, the plumbing job will be relatively easy to do in less time frame. The next step will be to bury the water line about 6 inches deep. However, if a plumbing team has to trench hard for rocky soil or solid clay, then this job can take a few hours more to trench properly. Contrarily, if the team is working in soft soil, it’s suggested to go at least 12 inches deep. As a result of that, you can reduce the probable risk of damage. No matter what is the desired depth of the project, a reputable plumber in Toronto can conveniently safeguard the water line from shovel attacks. The plumbing process requires certain precautions like covering the tubes with a couple of inches of soil and later pouring in roughly 2 inches of the dry or concrete mix (before the process gets to backfilled the trench). This soil moisture has the potency to harden the concrete material. After the plumbing team has completed the task and you are almost done with the underground plumbing project, check out how to turn the typical house exterior into a beautiful garden and outdoor space. This way, you can make your place the ultimate purchase attraction and sell your property via the highest auctions. 

4 Steps Involved In This Project

Go through the steps mentioned below that is needed for this project:

1) Plumbing the Faucet

The first step includes PEX tubing and building an inside connection. PEX tube is more flexible and resilient to damage from freezing. It can be your best choice for the supply line. Next, find the best flow rate at the garden, tap into an interior 3/4-inches cold water line. If you are unable to find one, tap into 1/2-inches deep. In case you have a water softener, tap into a water line before the softener.

2) Copper to PEX Transition

Secondly, you have to fix the pipeline and attach the PEX to a copper line. You must go for copper pipes because they are considered best for exposed plumbing. However, if you have a limited budget, you can surely go for PEX tubing-easier to fit than CPVC plastic. Once done with material selection, solder on a transition installation by attaching the PEX to a copper line.

3) Blow-Out System

If you happen to live in a cold region, you surely have to blow out the system before the first hard freeze. It’s an easy-to-do job with a home air compressor. Also, you have to fit the components presently (rather than during a snowstorm). Roughly the same process and techniques will be used for in-house and garden projects.

4) Mountain the Faucet

Now come the post and faucet. At this step, the plumbing team cuts the length of the deep PVC fence post to mount the tap. If you are self-doing the job, you can create your post out of any material. But, you have to make sure that the PEX goes inside. This way, you can protect it from sunlight (Note: the UV rays can reduce its life). Prefer to set a post roughly 18 inches deep.

Finally, I would like to mention here that this outdoor project can instantly boost your garden this season, you can water all of your plants in no time, and it’s an easy-to-do outdoor that can be self-conducted.

 

(2) comments

Add Your Reply